Sensitive and selective determination of 4-nitrophenol in water and food using modified polyethyleneimine-capped carbon dots

Hazardous 4-nitrophenol (4-NP) has created serious threats to humans and the environment; therefore, it is highly desirable to develop a facile and practical method for the monitoring of 4-NP in environment and food. Here, a fluorescence method based on modified polyethyleneimine-capped carbon dots (mPEI-CDs) was developed for sensitive and selective determination of 4-NP in water, fruit, and vegetable samples. First, highly fluorescent mPEI-CDs (quantum yield about 40.3%) were easily synthesized via a one-step hydrothermal method by using novel acetic anhydride modified polyethyleneimine (mPEI) and citric acid as precursors. Compared to the unmodified PEI-CDs, the acetic anhydride mPEI-CDs exhibited excellent fluorescent stability in a wider pH range of 4.0–9.0. Under pH 8.0, a selective determination of 4-NP was achieved based on the inner filter effect (IFE) mechanism. After optimization, good linear relationships between fluorescence intensity function (F₀-F)/F₀ and the concentration of 4-NP were obtained in ranges of 0.5–10 and 10–100 μM, respectively, while efficiently avoiding the interferences from two other nitrophenol isomers, possible coexisting metal cations and anions in samples. Finally, the proposed approach was successfully applied for the determination of 4-NP in water, honey, strawberry, and tomato samples.     

铋化物发光玻璃中银表面等离激元对铒离子的发光增强作用

局域表面等离激元可以由自由空间的光直接激发,这也是局域表面等离激元的优点所在。研究铋化物发光玻璃中纳米银颗粒的表面等离激元对铒离子发光的增强效应、进一步的提高铋化物发光玻璃中铒离子的发光性能很有意义。首先,测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃与(B)Er 3+(0.5%):铋化物发光玻璃样品的吸收谱,发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃在约600.0 nm处有一个较弱的宽的银表面等离激元共振吸收峰。同时发现两者都有典型的铒离子的吸收峰,它们的吸收几乎完全一样:在波峰形状、峰值强度和峰值波长等方面都很相近。测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃和(B)Er 3+(0.5%):铋化物发光玻璃样品的激发谱,发现有位于379.0,406.0,451.0,488.0和520.5 nm的5个550.0 nm可见光的可见激发谱峰,和位于379.0,406.5,451.0,488.5,520.5,544.0,651.5和798.0 nm的8个1531.0 nm红外光的红外激发谱峰,容易指认出依次为Er 3+的4I 15/2→4G 11/2,4I 15/2→2H 9/2,4I 15/2→(4F 3/2,4F 5/2),4I 15/2→4F 7/2,4I 15/2→2H 11/2,4I 15/2→4S 3/2,4I 15/2→4F 9/2和4I 15/2→4I 9/2跃迁的吸收峰,通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外激发谱的最大增强依次分别是238%和133%。最后,测量了它们的发光谱,发现有位于534.0,547.5和658.5 nm的三组可见发光峰,容易指认出依次为Er 3+的2H 11/2→4I 15/2,4S 3/2→4I 15/2,4F 9/2→4I 15/2荧光跃迁。还发现红外发光峰位于978.0和1531.0 nm,依次为Er 3+的4I 11/2→4I 15/2和4I 13/2→4I 15/2的荧光跃迁。通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外发光谱的最大增强依次分别是215%和138%。对于银表面等离激元增强铒离子发光的机理,认为主要为纳米银颗粒的局域表面等离激元共振,造成金属纳米结构附近产生的局域电场的强度要远大于入射光的电场强度,从而导致了金属纳米结构对入射光产生强烈的吸收和散射,进而导致了荧光的增强;即局域表面等离子体共振局域场的场增强效应。     

Synthesis of Caffeic Acid Sulphonamide Derivatives and Preliminary Exploration of Their Biological Applications

Structural modification of native compounds is an effective way to develop new drugs with increased pharmacological activities and improved material characteristics. In this study, caffeic acid sulphonamide derivatives(CSs) were synthesised by conjugating sulphonamides to the backbone of caffeic acid. The structures of these derivatives were elucidated by means of Fourier transform infrared spectroscopy(FTIR), ¹H NMR, ¹³C NMR, and electrospray ionization mass spectroscopy(ESI-MS). A content determination method was established by ultraviolet detection. The lipophilicity, 2,2-diphenyl-1-picrylhydrazy free radical(DPPH) scavenging capacity, anti-coagulant effects, anti-bacterial activity, cytotoxicity, in vitro anti-proliferative activity against tumour cells, and the ability of the compounds to promote the proliferation of chondrocytes were evaluated. The results indicate that CSs exhibit strong DPPH scavenging activity, high lipophilicity, good anti-coagulant activities, wide anti-bacterial activity range, low cytotoxicity, and an excellent ability to promote chondrocyte proliferation.     

高盐样品中锂的电感耦合等离子体发射光谱法(ICP-OES)测定研究

锂是重要的战略金属和新能源材料,其开发利用受到全球的高度关注。在高盐卤水特别是盐湖卤水和地下卤水中富含巨量的锂资源,在对这些资源进行锂的开发利用过程中,需对锂的含量进行准确测定,然而卤水中共存的高浓度Na+, K+, Ca2+和Mg2+会对微量锂的准确测定产生严重的干扰。电感耦合等离子体发射光谱法(ICP-OES)具有线性范围宽和多元素同步分析能力,针对卤水中锂的快速准确测定,详细开展了高盐样品中锂的ICP-OES分析方法研究。结果表明,锂在610.364 nm处具有较高的信噪比,且Na+, K+, Ca2+, Mg2+和Ar不会对锂的测定产生显著的谱线干扰。然而,样品中大量共存的Na+, K+和Mg2+会对锂的测定产生严重的基体正干扰,而Ca2+产生负干扰。尽管内标法在消除基体干扰方面具有广泛的应用,但传统的以钇和钪为内标元素的内标法不能有效解决该问题。此外,针对标准加入法操作繁琐、不适合批量样品分析问题,以及基体匹配法需多离子匹配,且不适合样品基体组成变化的批量样品分析等问题,考察了采用单一组分进行复杂基体匹配的可行性。由于NaCl广泛存在于卤水中,且对锂的测定具有显著的增敏效应,通过系列研究发现,通过同时向样品和标准溶液中加入10 g·L-1的NaCl,成功解决了总量不超过40 g·L-1的NaCl, KCl和MgCl2所产生的干扰。尽管采用该法或沉淀预分离方式均不能消除Ca2+产生的负干扰,但当样品中Ca2+含量不高于1.8 g·L-1时,对测定不产生显著的影响。通过采用该方法对三种不同基体组成的卤水样品进行加标回收测定,其回收率在96.60%~104.20%范围内。此外,通过与电感耦合等离子体质谱法(ICP-MS)测定结果进行对比,充分论证了该法的准确性和可靠性(相对误差±3.66%)。该法仅以单一的NaCl进行复杂基体匹配,不仅简化了操作,还实现了基体组成变化的批量样品分析,因而在卤水中锂的快速准确测定及锂资源开发利用方面具有重要意义。     

Syntheses and structures of two novel fluorescent metal–organic frameworks generated from a tridentate donor–acceptor motif ligand

The tridentate organic ligand 4,4′,4′′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6,10‐triyl)tribenzoic acid ( H₃L ) has been synthesized (as the methanol 1.25‐solvate, C₄₈H₃₉NO₆·1.25CH₃OH). As a donor–acceptor motif molecule, H₃L possess strong intramolecular charge transfer (ICT) fluorescence. Through hydrogen bonds, H₃L molecules construct a two‐dimensional (2D) network, which pack together into three‐dimensional (3D) networks with an ABC stacking pattern in the crystalline state. Based on H₃L and M(NO₃)₂ salts (M = Cd and Zn) under solvothermal conditions, two metal–organic frameworks (MOFs), namely, catena‐poly[[triaquacadmium(II)]‐μ‐10‐(4‐carboxyphenyl)‐4,4′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6‐diyl)dibenzoato], [Cd(C₄₈H₃₇NO₆)(H₂O)₃]_n, I , and poly[[μ₃‐4,4′,4′′‐(4,4,8,8,12,12‐hexamethyl‐8,12‐dihydro‐4H‐benzo[9,1]quinolizino[3,4,5,6,7‐defg]acridine‐2,6,10‐triyl)tribenzoato](μ₃‐hydroxido)zinc(II)], [Zn₂(C₄₈H₃₆NO₆)(OH)]_n, II , were synthesized. Single‐crystal analysis revealed that both MOFs adopt a 3D structure. In I , partly deprotonated HL ^2? behaves as a bidentate ligand to link a Cd^II ion to form a one‐dimensional chain. In the solid state of I , the existence of weak interactions, such as O—H…O hydrogen bonds and π–π interactions, plays an essential role in aligning 2D nets and 3D networks with AB packing patterns for I . The deprotonated ligand L ^3? in II is utilized as a tridentate building block to bind Zn^II ions to construct 3D networks, where unusual Zn₄O₁₄ clusters act as connection nodes. As a donor–acceptor molecule, H₃L exhibits fluorescence with a photoluminescence quantum yield (PLQY) of 70% in the solid state. In comparison, the PL of both MOFs is red‐shifted with even higher PLQYs of 79 and 85% for I and II , respectively.     

基于图像重组和比特置乱的多图像加密

针对现有多图像加密算法只能同时加密多张同类型同大小的图像,适用范围不广、实用性差等问题,提出一种基于图像重组和比特置乱的多图像加密算法.该算法通过将任意数量、不同大小和不同类型的图像重新组合成新多灰度图,一次完成同时加密,极大提高了加密效率和适用范围.首先,依次提取所有待加密图像像素值重新组合出N张m×n新灰度图,并将其转化成m×n×8N二进制矩阵.然后,采用3D比特置乱方式,对高位页进行行列比特置乱,低位页进行整页比特置乱.最后,进行异或扩散操作,得到密文图像.高低位分开置乱提高了算法的抗噪声能力,最终密文信息熵达到7.999以上,很好地掩盖了明文的统计特性.构造一种新型Logistic与广义三阶Fibonacci级联的混沌系统产生随机序列,增加了初值和控制参数范围,扩大了密钥空间,使其达到8×10^84以上,极大地提高了抗穷举攻击能力.既提高了序列随机性,又同时保留了低维混沌系统的快速性.结合明文哈希值(SHA-256)产生密钥,明文像素值发生微小改变后密文像素值变化率达到0.996以上,极大地提高了的明文敏感性和算法抗选择明文攻击的能力.实验分析表明,提出的多图像加密算法安全性高、实用性强.     

喷流冷却复合陶瓷薄片激光器的热特性仿真分析及实验研究

为分析喷流冷却复合陶瓷薄片激光器的热特性,设计用于冷却复合陶瓷薄片的喷流冷却系统.利用湍流换热理论和计算流体动力学仿真方法建立喷流冷却复合陶瓷薄片激光器的流固耦合热仿真模型,定义评价其冷却能力和冷却均匀性的定量参数.根据该仿真模型得到喷流冷却系统的最优设计参数,并进行实验验证.使用163孔喷板,流量为0.2kg/s,入口温度为20℃,在1200 W泵浦时获得359 W激光输出功率,并测得复合陶瓷薄片上表面的最高温度为92℃.激光输出功率与复合陶瓷薄片上表面温度均与泵浦功率呈近似正线性关系,且温度的实验值与仿真值相符度较高.     

基于非共轴阵列照明的小型化眼底相机光学系统设计

建立了非共轴阵列照明下的眼底成像数学模型,采用照明光路与成像光路独立设计方法,提出了一种微小型眼底相机光学系统,以避免传统眼底相机中人眼角膜与网膜物镜反射杂光对视网膜图像的干扰.设计了6阵列环形光源照明光路系统,长度仅17.9 mm,实现眼底视网膜有效照明线视场不小于12 mm;成像光路系统采用二次成像设计,光学调制传递函数优于0.2@91 lp/mm,畸变小于5%,长度仅为75 mm.仿真与设计结果表明,该眼底相机光学系统有效抑制了光路中的杂散光,有利于获得高对比度视网膜图像.研究结果可为高像质、小型化以及低杂光眼底相机发展提供设计参考.     

Bioinspired Healable Mechanochromic Function from Fluorescent Polyurethane Composite Film

Camouflage and wound healing are two vital functions for cephalopods to survive from dangerous ocean risks. Inspired by these dual functions, herein, we report a new type of healable mechanochromic (HMC) material. The bifunctional HMC material consists of two tightly bonded layers. One layer is composed of polyvinyl alcohol (PVA) and titanium dioxide (TiO₂) for shielding. Another layer contains supramolecular hydrogen bonding polymers and fluorochromes for healing. The as-synthesized HMC material exhibits a tunable and reversible mechanochromic function due to the strain-induced surface structure of composite film. The mechanochromic function can be further restored after damage because of the incorporated healable polyurethane. The healing efficiency of the damaged HMC materials can even reach 98 % at 60 °C for 6 h. The bioinspired HMC material is expected to have potential applications in the information encryption and flexible displays.